The firm foundation of SAB-profiel productsA range of materials is used for SAB-profiel products. Dependent on the application, we work with galvanised steel, Aluzink, stainless steel or aluminium (coated or uncoated). All of our materials are supplied according to the applicable European standards. Underneath you can read more about the differences and similarities.
Galvanised steel
The basis for all types of precoated steel is the steel itself. As the basic material, SAB-profiel uses continuously galvanized steel (also called: Sendzimir), MagiZinc®, Aluzink and Zink-Aluminium (Galvalloy®). The steel varieties can be supplied in qualities S280GD and S320GD. Purlins are available in the quality S350GD. Depending on the quality selected. the zinc layer varies between 100 and 275 gr/m². SAB-profiel supplies these materials in accordance with NEN-EN standards 10143,10326 and 10327.
Uncoated, galvanised materials (or an interior coating) are not suitable for exterior applications.
Stainless steel
Stainless steel is available as standard in the thicknesses 0.70, 0.80, 0.90 and 1.00 mm in the qualities 1.4301 and 1.4401. These qualities are solely available with a 2B-finish. Protective film is applied to both sides of the material. The stainless steel complies with the EN 10088-2 and EN 10259 standards. Other alloys may be supplied on request.
Aluminium
Aluminium is on reqest available in the thicknesses from 0.70, 0.80 and 1.00 mm, and is supplied in the form of EN AW-3105 alloy (AlMn 0.5 Mg 0.5). Depending on the order quantity, aluminium can be supplied with a polyester or PVDF coating. SAB-profiel supplies aluminium in accordance with the applicable European WN 485 standard.
|
